عينة مجانية
لا يوجد حد أدنى للطلب
خدمة OEM وODM
خدمة شاملة
خلفية المصنع
قدرات البحث والتطوير والتصنيع
التسليم في الوقت المناسب
ضمان لمدة سنة واحدة
Before starting to clean and harden your power tool, ensure that it is unplugged from the power supply to avoid any accidents.
Use a clean, dry cloth to wipe down the exterior of the tool to remove any dust, dirt, or debris. For tougher grime, you can use a mild detergent and a damp cloth. Make sure to avoid getting water in any electrical components or sensitive areas.
For blades or bits, use a wire brush or steel wool to remove any rust or buildup. You can also use a cleaning solution recommended by the tool manufacturer
Apply a thin layer of lubricant to any moving parts of the tool, such as gears or pivot points. This will help prevent rust and keep the tool running smoothly.
Finally, store the tool in a dry, clean place, free from any moisture, dust, or debris. Avoid storing the tool in extreme temperatures or direct sunlight, as this can damage the tool’s components.
لقد قضينا ساعات في البحث واختبار أدوات مختلفة لتحديد تلك التي توفر أفضل قيمة مقابل أموالك.
At MaxXT, we pride ourselves on providing high quality services to our customers. We understand that our customers have unique needs and expectations, and we strive to exceed them in every way possible.
MaxXT Tools is a leading manufacturer of power tools based in China. We were established in 2006 and have been making high-quality power tools for more than ten years, putting an emphasis on invention, research, and development.
We specialize in a wide range of power tools, including electric mixers, drywall sanders, electric polishers, impact drills, and more. With an emphasis on accuracy, toughness, and usability, our products are made to make your job simpler, quicker, and more effective
لاستخدام خلاطة الطين، قم بتوصيلها بمثقاب كهربائي، ثم اغمرها في الطين أو أي مادة خلط أخرى، ثم قم بتشغيلها مع رفعها تدريجيًا إلى السطح.
المنشار الترددي هو أداة كهربائية متعددة الاستخدامات تُستخدم عادةً لقطع مجموعة متنوعة من المواد مثل الخشب والمعادن والبلاستيك.
قم بضبط عمق الشفرة لتتناسب مع سمك المادة التي يتم قطعها، ثم قم بمحاذاة الشفرة مع خط القطع، ثم ضع حذاء المنشار بشكل آمن على المادة، ثم قم بتشغيل المنشار وقم بتوجيهه على طول الخط مع الحفاظ على قبضة ثابتة على مقبض المنشار.
تعمل أجهزة رش الطلاء الخالية من الهواء عن طريق ضخ الطلاء تحت ضغط عالٍ من خلال طرف صغير، مما يؤدي إلى تفتيت الطلاء إلى قطرات صغيرة يتم رشها بعد ذلك على السطح، مما يؤدي إلى الحصول على ملمس ناعم ومتساوي.
يضيف:
هاتف:
واتساب:
بريد إلكتروني:
حقوق الطبع والنشر © 2024 MaxXT Technical
يستخدم هذا الموقع الإلكتروني تقنيات مثل ملفات تعريف الارتباط لتمكين وظائف الموقع الأساسية، بالإضافة إلى أغراض التحليلات والتخصيص والإعلانات المستهدفة.