Wholesale Brushless Orbital Sanders

The weakest point in a brushed orbital sander is always the same thing. Carbon brushes. Run the tool every day and they start wearing down within months. Power drops, the motor runs hotter, and before long the customer is getting uneven finishes and thinking the tool is cheap junk. We have watched that cycle repeat with distributors too many times.

MaxXT brushless orbital sanders were built to skip that failure entirely. The 350W motor has no brushes and no commutator to wear out, so the power output stays the same on day one and day five hundred. It runs cooler too, because there is no brush friction generating heat inside the housing. The six-speed dial gives operators a useful range from 4,000 to 10,000 RPM, and constant speed electronics keep the RPM from sagging when they press into the material. Soft-start keeps the pad from jerking at power-on.

That is why we focus on brushless. As a wholesale brushless orbital sander supplier, fewer returns means better business for both of us.

Преимущество сотрудничества

MaxXT — партнер, который предлагает комплексное обслуживание для своих дилеров. Присоединяйтесь к нам сегодня и воспользуйтесь следующими преимуществами

Поддержка конкурентоспособности

Мы проводим для вас анализ рынка и конкурентов.

Бесплатный образец для теста

Мы предлагаем вам бесплатные образцы для проверки качества, функциональности и пригодности продукции.

Нет минимального заказа

Мы обеспечиваем вам большую гибкость в управлении запасами и бюджетами.

Доставка D2D в течение 7 дней

Мы избавим вас от суеты и сэкономим ваше время.

Brushless Orbital Sanders

For general flat sanding, the R7308 uses a 150mm round pad that covers surface area quickly. When the job needs a swirl-free finish on paint or clear coat, the MOS350C-5.0 and MOS350C-2.5 use random orbit action with 125mm and 150mm pads. And for corners and edges that round pads cannot reach, the MOS350D triangle pad does the detail work. All four models run on the same 350W brushless platform with six-speed control and a 28mm dust port that fits standard shop vacuums.